Questions? Feedback? powered by Olark live chat software

Litetronics 50 Watt LED 3 Tube Retrofit Kit for 2x4 Troffer - 4000K 120V-277V 83 CRI 5850 Lumen - DLC Standard (RF50UQT440)

Litetronics 50 Watt LED 3 Tube Retrofit Kit for 2x4 Troffer - 4000K 120V-277V 83 CRI 5850 Lumen - DLC Standard (RF50UQT440)

Item No: RF50UQT440


IN STOCK - Same Day Shipping (Order by 8pm ET M-F)

  • Special oversize shipping fee required.


Brand Litetronics Manufacturer Part Number RF50UQT440
Product Category LED Product Type Retro Kit
Warranty 7 Year Similar To 3 Lamp F32T8
DLC DLC Standard Wattage 32
Voltage 120V/208V/240V/277V Color Tone Cool White
Initial Lumens 5850 CRI 83
Control Non-Dimmable Average Life (Hours) 85,000
Minimum Operating Temperature -5°F (-20°C) Maximum Operation Temperature 95°F (35°C)
Power Factor/Efficiency >.95 Fixture Type LED Troffer Retrofit
Housing Finish White Fixture Application Restaurants, Retail, Schools, Hospitals, Office Lighting
Kelvin Temperature 4000


Length (in)44.5 Height (in)1.9
Width (in)11.25


Switch existing fluorescent fixtures to LED in minutes with the Litetronics RF50UQT440 2x4 LED retrofit kit, designed for quick and easy installation. Fluorescent tubes and ballast are removed and replaced with LED tubes, which adhere securely to the existing fixture using powerful rare earth magnets. This preserves the look of your current fixture while saving around 60% energy and avoiding a large maintenance project.

At 4000K, this provides a clean, crisp, bright light perfect for schools, hospitals, offices, retail and more.

What you'll need for the installation:
• Step Ladder
• Screw Driver
• Wire Cutters

Installation Instructions:
1. Turn off power at the circuit breaker
2. Open the cover of the existing fixture
3. Remove the existing fluorescent tubes and ballast cover
4. Disconnect the ballast wires from incoming power lines
5. Cut the remaining wires close to the fixture
6. Unscrew and remove the ballast completely
7. Attach LED retrofit to the housing (attaches magnetically)
8. Position and secure with included self tapping screws
9. Connect the incoming electrical line to the included male connector clip
10. Make sure wires are tucked behind LED tubes
11. Cover both connectors and incoming wires using provided magnetic junction box cover
12. Secure junction box with self tapping screws
13. Apply the included labels to the fixture
14. Close the cover and restore the power

Learn more with this instruction sheet and quick video:
+ more