Questions? Feedback? powered by Olark live chat software

Litetronics 32 Watt LED 2 Tube Retrofit Kit for 2x4 Troffer - 5000K 120V-277V 83 CRI 3600 Lumen - DLC Standard (RF32UQT450)

Litetronics 32 Watt LED 2 Tube Retrofit Kit for 2x4 Troffer - 5000K 120V-277V 83 CRI 3600 Lumen - DLC Standard (RF32UQT450)

Item No: RF32UQT450


IN STOCK - Same Day Shipping (Order by 8pm ET M-F)

  • Special oversize shipping fee required.


Brand Litetronics Manufacturer Part Number RF32UQT450
Product Category LED Product Type Retro Kit
Warranty 7 Year Features Preserves the look of existing fixtures
Similar To 2 Lamp 432T8 DLC DLC Standard
Wattage 32 Voltage 120V-277V
Color Tone Daylight Initial Lumens 3600
CRI 83 Control Non-Dimmable
Average Life (Hours) 85,000 Minimum Operating Temperature -5°F (-20°C)
Maximum Operation Temperature 95°F (35°C) Power Factor/Efficiency >.95
Fixture Type LED Troffer Retrofit Housing Finish White
Fixture Application Restaurants, Retail, Schools, Hospitals, Office Lighting Kelvin Temperature 5000


Length (in)44.5 Height (in)1.9
Width (in)11.25


Switch existing fluorescent fixtures to LED in minutes with the Litetronics RF32UQT450 2x4 LED retrofit kit, designed for quick and easy installation. Fluorescent tubes and ballast are removed and replaced with LED tubes, which adhere securely to the existing fixture using powerful rare earth magnets. This preserves the look of your current fixture while saving around 60% energy and avoiding a large maintenance project.

At 5000K, this simulates daylight providing a bright white and alert atmosphere perfect for galleries, museums, hospitals and more.

What you'll need for the installation:
• Step Ladder
• Screw Driver
• Wire Cutters

Installation Instructions:
1. Turn off power at the circuit breaker
2. Open the cover of the existing fixture
3. Remove the existing fluorescent tubes and ballast cover
4. Disconnect the ballast wires from incoming power lines
5. Cut the remaining wires close to the fixture
6. Unscrew and remove the ballast completely
7. Attach LED retrofit to the housing (attaches magnetically)
8. Position and secure with included self tapping screws
9. Connect the incoming electrical line to the included male connector clip
10. Make sure wires are tucked behind LED tubes
11. Cover both connectors and incoming wires using provided magnetic junction box cover
12. Secure junction box with self tapping screws
13. Apply the included labels to the fixture
14. Close the cover and restore the power

Learn more with this instruction sheet and quick video:
+ more